Renewable Design for Truss Head Tapping Screw - self drilling screw with wings – DaHe
Renewable Design for Truss Head Tapping Screw - self drilling screw with wings – DaHe Detail:
For assembling wood on metal, a hole in the wood is required with some space to avoid threading, the wood before the drill in the strip is finished, The Self-Drilling point drills steel whilst the wing tips create a pilot hole braking off when passing through the steel,Otherwise the drill tip could be burned, the wood,broken or the fixing wood-strip unglued.
Application
1:Both wings avoid the wood to be damaged by drilling a pilot hole.
With ribs under the head that countersunk the wood straight away, also melamine and other
materials.
2:Fine Thread Self-Drilling Countersunk Winged Screws are suitable for timber, fibre cement and chipboard to metal where a flush finish is required.
Feature
1: Self Drilling Screws with wings
2:Drills the wood.
3:Wood ream + metal drill.
4:Threads in the metal plate
5:After threading the ribbed underside of the screw head self-embeds for a flush or recessed finish, driving out any loose particles when countersinking.
Take these precautions
1:Drill previously a hole bigger than thread’s diameter.
2:Use an extra-large self drilling screw (non commercial).
3:Use a self drilling screw with two wings: the reamer created on the wood has a bigger diameter than thread so that this does not touch the wood. Wings and thread will break in contact with metal.
If you have a question, require a unique solution or are looking for a fastener that is not listed, please contact us with your requirements.
Specification
|
Brand |
Solidex |
|
Product Type |
self drilling screw with wings |
|
Material |
carbon steel |
|
Drive Type |
Self Embedding, winged with a Phillips #2 or #3 Drive |
|
Product Length |
5/8″ 3/4″ 7/8″ 1″ 1-1/8″ 1-1/4″ 1-7/16″ 1-1/2″ 1-5/8″ 1-3/4″ 1-13/16″ 1-7/8″ 2″ |
|
Screw Diameter (mm) |
6#/7#/8#/10#/12# |
|
Thread Length |
Fully Thread/Partial Thread |
|
Head Type |
Countersunk/Countersunk ribbed |
|
Finish |
Color Zinc/Yellow Zinc/White Zinc/Ruspert/Customized |
|
Corrosion resistance class |
C4 |
|
Product Standard |
GB/DIN7ANSI/BS/JIS |
|
Approvals |
CE |
|
Packing |
On Requirements |
|
OEM |
Accept customization |
|
Sample |
Free |
|
Suitable Use Type |
Suitable for Outdoor/Indoor Use |
|
Supply Ability |
100 Ton per Day |
NOTE:
1: Drill Capacity: 8g (0.75-2.5mm of steel), 10g (0.75-3.5mm of steel)
2:Driver Type: Philips P2
3:Installation Speed: 2300-2500 RPM Max Drill Speed
Product detail pictures:
Related Product Guide:
All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Renewable Design for Truss Head Tapping Screw - self drilling screw with wings – DaHe , The product will supply to all over the world, such as: Rwanda, Johannesburg, Sri Lanka, Make sure you genuinely feel free to send us your requirements and we are going to respond for you asap. We now have got a skilled engineering group to serve for your just about every detailed needs. Cost-free samples could be sent to suit your needs personally to understand much more information. In an effort to meet your requires, be sure to seriously feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd objects. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is really our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
By Christopher Mabey from Roman - 2017.02.14 13:19
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Dominic from Istanbul - 2018.06.12 16:22
